Rows of industrial cable reels holding silver and gray power cable inside a large South Carolina wire warehouse

Wire buying

SEU Cable Buyers in South Carolina

SEU cable is the flat service entrance assembly with a concentric neutral wrapped around the insulated conductors. It is used for single-phase services and is bought in reels that often outlast the job.

Wire and cable only. Statewide South Carolina pickup, no obligation to sell.

SEU in South Carolina service work

Single-phase services in residential and small commercial buildings still use SEU for the run from the meter to the panel. Contractors keep reels in the common sizes and replace them when a larger service is required, which leaves partial reels behind.

Aluminum SEU is the volume product. Copper SEU appears in smaller services and in retrofit work where the existing service is copper.

Concentric neutral condition

The neutral is exposed in a flat SEU assembly, wrapped around the insulated conductors under an overall jacket. If the jacket is damaged, the neutral is the first thing to corrode, and a corroded neutral changes the value significantly.

Photograph the cut end and the jacket. If the neutral strands are bright and the jacket is intact, the cable is straightforward to quote. If the neutral is dark or green, tell us and we will price accordingly.

Full reels and job leftovers

Full 250-foot reels of 4/0 aluminum SEU are the easiest item to sell. Partial reels with 50 feet or more are also purchased. Short pieces are usually combined into a mixed lot with other service cable.

Because SEU is flat, it stores and ships compactly, which makes small lots easier to move than round cable of the same size.

What we buy in this category

  • 2-2-2 SEU aluminum and copper
  • 1/0-1/0-1/0 SEU
  • 2/0-2/0-2/0 SEU
  • 4/0-4/0-4/0 SEU
  • 350 MCM SEU
  • Three-conductor SEU with reduced neutral
  • Partial reels of 50 feet and above
  • Full 250 ft factory reels
  • Meter-to-panel service leftovers
  • Copper SEU retrofit material
  • Discontinued SEU sizes
  • Mixed service entrance cable lots

Specifications and buying notes

The table below reflects the constructions we see most often in South Carolina surplus. Variations exist between manufacturers, and the print on the jacket always governs.

SEU Cable specifications
ConstructionTwo or three insulated conductors with concentric neutral, flat assembly
Voltage rating600 V
Temperature rating90°C dry, 75°C wet
Common sizes2-2-2, 1/0-1/0-1/0, 2/0-2/0-2/0, 4/0-4/0-4/0, 350 MCM
ConductorCopper or AA-8000 aluminum
StandardsUL 44, NEC Article 338
ApplicationsSingle-phase service drops, meter-to-panel runs
Packaging125 ft, 250 ft and 500 ft reels

What photographs help us price this fastest

A shot of the reel tag, a close-up of the jacket print, a clear view of the cut end, and one overview photograph of the whole inventory. Four images usually settle every question we have without a site visit.

Wooden reels of black industrial electrical cable stacked on a warehouse floor
Reels and spools as they arrive from plants, distributors and contractors.
Stacked wooden wire spools of black cable staged along a warehouse wall
Full and partial reels are both purchased, priced on construction and footage.
Stacked wooden wire spools of black cable staged along a warehouse wall
Reel tags, jacket print and cut ends tell us what the material is.

Questions about selling seu cable

Do you buy SEU with a corroded neutral?

We evaluate it, but corrosion in the concentric neutral reduces value substantially. Send photographs of the cut end.

What sizes of SEU do you purchase?

From 2-2-2 through 350 MCM, in copper and aluminum.

Can I sell partial SEU reels?

Yes, generally from 50 feet upward, depending on size and condition.

Is SEU still used in new construction?

Yes, for single-phase services where the assembly is permitted. It remains common in residential and light commercial work.

Read the full seller guide

Request a quote

Tell us what is on the reel

Send the basics and a few photographs. Reel tags, jacket markings and cut ends are usually enough for us to price the material without a site visit.

  • Manufacturer or brand, if legible
  • Wire type, gauge or size, and voltage rating
  • Approximate footage and number of spools
  • Photos of reel tags, jacket print and cable ends

Prefer to talk? (614) 715-3047
saleselectricalbuyers@gmail.com

Surplus wire quote request

Fields marked * are required. Photographs may be added below; total upload size is limited to 10 MB.

Start typing your city or town. If you are outside a municipality, enter the nearest town.

Reel tags, jacket markings, cut ends, and the overall inventory. Add more photos in the fields below.

No obligation. We reply with an evaluation, not an automated price.

Submissions and photo attachments are delivered by email to our buying team. We do not publish or share your inventory information.

Sell your surplus wire
(614) 715-3047 Get a quote